3 variant 2: stack expansion backwards, Variant 2: stack expansion backwards -9 – YSI DIQ/S 182-MOD System 182 User Manual
Page 23
Advertising
System 182
Installation
3 - 9
ba76025e01
02/2012
3.4.3
Variant 2: stack expansion backwards
Preparing the stack
mounting
Fig. 3-6
Preparing the MIQ modules for stack mounting (variant 2)
Mounting the contact
base
Fig. 3-7
Mounting the contact base (variant 2)
1
Remove the covers from the drilled mounting holes (pos. 1 and
3 in Fig. 3-6).
2
Remove the contact cover (pos. 2).
3
Pull off the adhesive label (pos. 4).
4
On the MIQ module, remove the two countersunk screws (pos.
5) and swing open the module lid.
5
1
3
2
4
For stack mounting remove label
and install contact carrier
3
4
MIQ module
DIQ/S 182-MOD
6
7
DIQ/S 182-MOD
Advertising