YSI IQ S ENSOR N ET Field bus linking - Manual (Page 14)

Configuring the IQ S ENSOR N ET IQ S ENSOR N ET Field bus linking
12 ba76148e01 06/2013
3 Configuring the IQ S
ENSOR
N
ET
3.1 Configuring the IQ S
ENSOR
N
ET
for Profibus
3.1.1 Setting the PROFIBUS address
Opening the setting
menu for Profibus
Settings
3.1.2 GSD file
The GSD file contains all necessary information on the Profibus module
and is required by the configuration program of the Profibus master.
The current GSD file is provided on the Internet under www.WTW.com.
1 Open the setting menu with <S>.
2 For MIQ/MC2:
Press <> and <OK> to select and confirm the menu
item, Settings of bus interfaces
3 Select and confirm the bus interface with <> and
<OK>.
Setting Selection/Values Explanation
Device Address 1 ... 126 Instrument address of the
IQ S
ENSOR
N
ET
in the
Profibus
4 Edit the settings.
To accept all settings, you have to highlight the Save and
quit menu item at the lower end of the setting table and to
confirm with <OK>. If you exit the setting table via <M>,
<ESC>/Quit or the Quit menu item, all changes are
ignored.