YSI IQ S ENSOR N ET Field bus linking - Manual (Page 12)

Installing the interface in the IQ S ENSOR N ET IQ S ENSOR N ET Field bus linking
10 ba76148e01 06/2013
Connecting the Ethernet
cable with the main PCB
Fig. 2-3 Ethernet connection with RJ45 socket
1 Open the MIQ module.
2 Disconnect the flat flexible cable (pos. 1 in Fig. 2-3) from the
main PCB.
3 Unscrew the RJ45 socket enclosure (pos. 2 in Fig. 2-3).
4 Screw a cable gland with sealing ring into the free duct. Then
loosen the cap nut of the cable gland.
1
2