Caution – YSI IQ S ENSOR N ET Field bus linking User Manual
Page 8
Advertising
Installing the interface in the IQ S
ENSOR
N
ET
IQ S
ENSOR
N
ET
Field bus linking
6
ba76148e01
06/2013
Fig. 2-1
Removing the safety bracket
Caution
If water gets into the enclosure of a module with internal power
supply, there is danger of an electric shock.
If water gets into the enclosure of an MIQ module, there is a risk
of short circuits.
To prevent the enclosures of the IQ S
ENSOR
N
ET
from being pene-
trated by water the following must be observed:
Follow the safety instructions of the IQ S
ENSOR
N
ET
system op-
erating manual.
Use connectors recommended by YSI only.
When the connector is removed, the connection socket of the
IQ S
ENSOR
N
ET
must be closed with the blind plug and secured
with the safety bracket.
1 Safety bracket
Po
we
r
!
OK
1
Advertising