YSI IQ SensorNet MIQ/A-MOD Module - Manual (Page 8)

Safety instructions MIQ/(A-)MOD
8 ba76021e01 01/2012
2.2 General safety instructions
The MIQ/(A-)MOD is constructed and inspected in accordance with the
relevant guidelines and norms for electronic instruments (see chapter
5 W
HAT TO DO IF ...).
It left the factory in a safe and secure technical condition.
Function and
operational safety
The failure-free function and operational safety of the MIQ/(A-)MOD is
only guaranteed if the generally applicable safety measures and the
special safety instructions in this operating manual are followed during
its use.
The failure-free function and operational safety of the MIQ/(A-)MOD is
only guaranteed under the environmental conditions that are specified
in chapter 5 W
HAT TO DO IF ....
Safe operation If safe operation is no longer possible, the MIQ/(A-)MOD must be taken
out of operation and secured against inadvertent operation.
Safe operation is no longer possible if the MIQ/(A-)MOD:
 has been damaged in transport
 has been stored under adverse conditions for a lengthy period of
time
 is visibly damaged
 no longer operates as described in this manual.
If you are in any doubt, contact the supplier of your MIQ/(A-)MOD.