6 storage, 7 disposal, Storage -16 – YSI IQ S ENSOR N ET TriOxmatic 702 IQ User Manual
Page 38: Disposal -16
Maintenance, cleaning, disposal, and replacement
TriOxmatic
®
702 IQ
5 - 16
ba76048e01
01/2012
5.6
Storage
Store the clean and dry sensor with its protective cap in place. Observe
the allowed temperature range (see chapter 7 T
); the
sensor may be stored in any position.
5.7
Disposal
We recommend disposing of the sensor without the membrane head as
electronic refuse.
Caution
The ELY/A electrolyte solution irritates eyes, skin and mucus
membranes. If it comes into contact with the eyes, rinse
thoroughly with water and consult a doctor! During working
activities, always wear suitable protective gloves and protective
goggles/face shield! Follow the safety datasheet.
Disposal of the
membrane cap
Note
To dispose of the chemicals, follow the corresponding safety
datasheets. The safety datasheets can be obtained from YSI.
1
Before disposing of the membrane head, unscrew it and rinse
with water.
2
Dispose of the membrane head in the household refuse.