YSI pHotoFlex pH Handheld Colorimeter - Manual (Page 25)

pHotoFlex
®
pH Operation
25 ba76123e01 02/2013
4.3.4 Navigation example 2: Setting the date and time
The meter has a clock with a date function. The date and time are indi-
cated in the status line of the measured value display. When storing
measured values and calibrating, the current date and time are auto-
matically stored as well.
Numerals are generally entered via the number keys.
The correct setting of the date and time and date format is important for
the following functions and displays:
 Current date and time
 Calibration date
 Identification of stored measured values.
Therefore, check the time at regular intervals.
4 Select the Language menu with <> <>.
The current selection is highlighted as white text on a black
background.
5 Open the setting of the Language with <START/ENTER>.
6 Select the required language with <> <>.
7 Confirm the setting with <START/ENTER>.
The setting is active. The menu is displayed in the selected lan-
guage.
8 To make further settings, switch to the next higher menu level
with <ESC>.
or
Switch to the measured value display with <M> (short pres-
sure).
The instrument is in the measurement mode.
Language : Deutsch
Store
Display
Reset
Interface
Continue ...
System