YSI pHotoFlex pH Handheld Colorimeter - Manual (Page 61)

pHotoFlex
®
pH Operation
61 ba76123e01 02/2013
4.7.1 Storing measurement datsets
Proceed as follows to transmit to the data storage and simultaneously
output to the interface a measurement dataset:
A measurement dataset is stored quickly by twice pressing <STO>. It
is stored with the ID last set.
If the storage is full You can erase the entire storage (see section 4.7.5), or overwrite the
oldest dataset with the next storing procedure.
A security prompt appears before a dataset is overwritten.
1 Press the <STO> key.
The Store display appears.
2 Using <> <>, <START/ENTER> and the number keys,
change and confirm the ID number (ID) as necessary (0 ...
999).
3 Using <START/ENTER> or <STO>, confirm Store.
The dataset is stored. The instrument switches to the mea-
sured value display.
i 02.02.2005 11:24:16
0.00 mg/l PO4-P BV
PROG 1
ID: 1
Store (ID: 1:
Store ( 996 free )s