YSI pHotoFlex pH Handheld Colorimeter - Manual (Page 63)

pHotoFlex
®
pH Operation
63 ba76123e01 02/2013
4.7.3 Displaying measurement datsets
You can read out stored datasets on the display. Only those datasets
are displayed that correspond to the selected filter criteria (see
section 4.7.2).
Start reading out the data on the display in the menu, Configuration /
System / Measured value memory / Display.
Display of a dataset
Further datasets that correspond to the filter criteria are displayed with
the <> <> keys.
Quitting the display To quit the display of stored measurement datasets, you have the fol-
lowing options:
 Switch directly to the measured value display with <M> (short pres-
sure).
 Leave the display and switch to the higher menu with <ESC> or
<START/ENTER>.
4.7.4 Downloading the measurement datsets to the RS232 inter-
face
You can download stored datasets to the RS232 interface. Only those
datasets are downloaded that correspond to the selected filter criteria
(see section 4.7.2).
The datasets are downloaded in the adjusted output format (see
section 4.8.3).
The data download to the interface is started in the menu, Configura-
tion / System / Measured value memory / RS232 download.
02.02.2005 11:24:16
ID: 1
7.000 (pH)
24.8 °C AR
i Scroll with ▲ ▼