YSI TruLab 1310P - Manual (Page 44)

Settings TruLab pH 1310
44
ba76156e01 03/2014
7.3.2 Data storage
This menu contains all functions to display, edit and erase stored measured
values and calibration records (see section 8 D
ATA STORAGE , page 47).
7.4 Reset
You can reset (initialize) all sensor settings and sensor-independent settings
separately from each other.
System / General /
Switchoff time
10 min ... 1h ...
24 h Adjusts the switch-off time
System / Interface /
Baud rate 1200, 2400,
4800, 9600,
19200 Baud rate of the data interface
System / Interface /
Output format
ASCII
CSV Output format for data trans-
mission (see section 9 T
RANS -
MITTING DATA (USB INTERFACE ),
page 53)
System / Interface /
Decimal separator
Dot (xx.x)
Comma (xx,x) Decimal separator
System / Interface /
Output header
Output of a header for Output
format: CSV
System / Printer Settings for the integrated prin-
ter of the TruLab pH 1310 P.
For details, see section 10
P
RINTER ( ONLY
T RU L AB P H 1310P), page 55
System /Clock Date format
Date
Time Time and date settings (see
section 4.4.6 E
XAMPLE
2
ON
NAVIGATION
: S
ETTING THE DATE
AND TIME , page 20)
System /Service
information Hardware version and software
version of the meter are dis-
played.
System /Reset - Resets the system settings to
the delivery condition (see sec-
tion 7.4.2 R
ESETTING THE SYS -
TEM SETTINGS , page 45).
Menu item Possible set-
ting Description