Xylem Magflux Electromagnetic Flow Meter - Manual (Page 109)

109
Electromagnetic Flow Meter
FW: 842018/842009
Events
Sensor Auto Cal. Event - Hold of flow output value
because of auto calibration in con-
verter (Normal)
Batch1 Ended Event - Batch 1 has finished
Batch2 Ended Event - Batch 2 has finished
System reset has occurred Event - The converter has experi-
enced a software or hardware reset
(normal if the sensor number has
been changed)
Exceptions
Illegal function Modbus function is not supported
Illegal address The address is not valid
Illegal format Data has an illegal format
Illegal data value Data has a non-valid value
Missing user login User password required to access
Missing MJK login MJK password required to access
Relay used for pulse counter posi-
tive The relay is already in use by
another function. Select a different
relay.
Relay used for pulse counter nega-
tive The relay is already in use by an-
other function.
Used for Resettable totalizer total The relay is already in use by an-
other function.
Used for batch counter 1 The relay is already in use by an-
other function.
Used for batch counter 2 The relay is already in use by an-
other function.
Used for low flow The relay is already in use by an-
other function.