Xylem Magflux Electromagnetic Flow Meter - Manual (Page 51)

51
Electromagnetic Flow Meter
FW: 842018/842009
Factory Settings
The "Factory Settings" menu resets the display to default settings, to met-
ric settings or to US settings.
Note: The converter settings are not changed from this menu. Converter
settings are covered in "Converter Setup" on page
61 .
1. Press the up/down keys to highlight the required menu line (here: Fac-
tory Settings) and then press OK to select it.
Specify Main Screen
Factory Settings
Data Logger
Password
Set Sensor Name
Converter Setup
Display Setup
Back Select OK
Main Menu
Factory Settings
2. Press the up/down keys to highlight the required option and then press
OK to select it.
Recover Factory Settings
Cancel
Default
Set to Metric
Set to US
Back Select OK
Factory Settings
The available options are:
Cancel
Exit the menu without changes
.