Xylem Magflux Electromagnetic Flow Meter User Manual
Page 112
Advertising
112
EN 3.05 MagFlux Manual 1212
Electromagnetic Flow Meter
2. Unscrew the four screws that hold the Display Unit.
3. Lift out the Display Unit and connect a USB mini A/B cable to the mini
USB female B connector on the rear of the front panel.
4. Connect the other end of the USB cable (max. 4.7 metres long) to the
PC.
5. Select "File" in the menu bar and click "Connect".
If the connection is successful, a "Device Clock" window for PC and
device time synchronisation is displayed (if PC and device clock were
out of sync.) along with a link status display (see below).
If the connection fails, first remove the cable and then re-connect it.
For further details, read the manual regarding MJK Field Link:
Advertising