Product identification – Xylem Magflux Electromagnetic Flow Meter User Manual
Page 14
14
EN 3.05 MagFlux Manual 1212
Electromagnetic Flow Meter
Product Identification
A delivery will usually consist of a MagFlux
®
converter and a MagFlux
®
flow sensor. Check that the item(s) delivered corresponds to the ordered
item(s). The part number and the calibration code are printed on an iden-
tification label sticked onto the flow converter shipping box and on a label
on the flow converter itself. The part number, the serial number, the cali-
bration code and the electrode/lining data for the flow sensor are printed
on a green name plate (see example below).
This calibration code (Cal. code) is unique and provides the MagFlux
®
converter with information about flow sensor number, nominal diameter of
the flow sensor and calibration data for the flow sensor.
The current converter firmware requires an 8-character input, but it also
accepts 6 characters plus two "Ok"s. The example above (dw5uq4) would
require that you enter: d w 5 u q 4 "Ok" "Ok", where "Ok" indicates that
you press the "Ok" key without selecting any character. Only small letters
can be entered from the MagFlux
®
keypad.
If changes are needed to the unique sensor calibration code following
initial setup, this is the calibration code that the "Sensor Calibration Code"
menu must contain (see pages
and
).