Xylem Oxix Dissolved Oxygen Transmitter - Manual (Page 7)

7
Dissolved Oxygen Transmitter
GB Oxix Manual 080915
FW: 841013-009, 846001-002, 841513-009
1. Introduction
Thank you for choosing the MJK Oxix ® Dissolved Oxygen Transmitter. We
have done our utmost to design and manufacture a quality transmitter that
satisfies your requirements:
High performance optical sensor •
No calibration •
No spareparts needed in sensor's 10 year lifetime •
Air or water jet cleaning system is standard •
Measurements not affected by sunlight or dry environment •
Large, easy-to-read display with trend curve capability •
Multiple languages •
Built-in datalogger •
No moving parts, oxygen consumption or risk of poisoning •
Mounting accessories • (optional)
The Oxix ® transmitter is easy to install, calibrate and put into service. How-
ever, read this manual first to get familiar with the Oxix ® transmitter and all its
features.
The equipment must be handled and operated as instructed by the manufac-
turer, MJK Automation A/S to ensure stable operation and accurate measure-
ments.
You can always contact your local representative or the MJK hot lines for
advice and guidance:
Europe • Tel.: +45 45 56 06 56 E-mail: [email protected]
Denmark • Tel.: +45 45 56 06 56 E-mail: [email protected]
Norway • Tel.: +47 69 20 60 70 E-mail: [email protected]
Sweden • Tel.: +46 53 31 77 50 E-mail: [email protected]
Holland • Tel.: +31 251 672171 E-mail: [email protected]
USA • Tel.: +1 847 482 8655 E-mail: [email protected]
Australia • Tel.: +61 3 9758 8533 E-mail: [email protected]
Visit our web sites at www.oxix.dk and www.mjk.com to learn more about
MJK Automation, our other products and the people behind them.
Oxix ® is a registered trademark of MJK Automation A/S, Denmark.