Xylem MULTI 3400i pH/Cond MULTI-PARAMETER METERS - Manual (Page 43)

pH/Cond 3400i Operation
43
Switching the tempera-
ture compensation off
You can switch off the temperature compensation as follows:
1 Press the <CAL> key repeatedly until tc appears on the dis-
play.
2 Press the <RUN/ENTER> key.
3 Press the <CAL> key repeatedly until four bars appear in the
lower line of the display.
4 The temperature compensation is switched off.
5 To return to the measuring mode: Press the <M> key. From
now on, the instrument will measure without temperature com-
pensation.
nLF Cal
Tref20 Tref25
Lin
TP
C °
% / K
S
F
cm 1/
LoBat RCL AR
°
M
% mg/l
mV/pH
m
Sal TDS
Auto Store
Sal
mbar
O UpH
cm
AutoCal DIN
AutoCal TEC
Time Baud
Day.Month No.
Ident Year
- - - -
2 4 2
S/
cm
ARng
1