Xylem MULTI 3400i pH/Cond MULTI-PARAMETER METERS - Manual (Page 45)

pH/Cond 3400i Operation
45
4.6 Saving
The measuring instrument has an internal data memory. It can store up
to 500 data records.
A complete data record consists of:
z Number of the storage location
z Date/time
z Measured values of the probes connected
z Temperature
z Temperature measuring procedure
z ID number
You can transmit measured values (data records) to the data storage
in two ways:
z Save manually
z Switch on AutoStore (Int 1), (see page 47).
4.6.1 Saving manually
You can transmit a measured value to the data storage as follows:
1 Press the <STO> key.
The current number (location number No.) of the next free stor-
age location appears under the current measured value on the
display.
2 Confirm with <RUN/ENTER>.
The display switches to entering the ID number.
%
O U
TP
° C
7 1
m
Sal
mg/l
8
LoBat
Time Baud
Day.Month
Ident Year
Sal
mbar
1
S
RCL AR
Auto
Cal
° F
1/cm
/ K %
TDS
mV/pH
S/ cm
cm M
Lin
Tref25 Tref20
nLF
AutoCal DIN
AutoCal TEC
4
9 9 6
ARng
No.
Store
pH