Picture controls buttons – Extron Electronics IN1508 User Guide User Manual
Page 18
NOTES:
•
With regard to the PIP function, there are two groups of inputs:
•
Low resolution — Inputs 1 through 4 (and input 5 if it is configured
as interlaced component video; see “
” on page 25.
•
High resolution — Inputs 6 through 8 (and input 5 if it configured
as progressive component video/HDTV; see “
” on
page 25.
The PIP function toggles between the selected input in each group. The
PIP function cannot toggle between two inputs in the same group.
•
The size of the PIP window is set in the menu system (see “
” on page 34, for details). The position of the PIP window
is set with the centering adjustment (see “
” on
page 36 for details).
•
If PIP mode is off (the PIP Mode On LED is off), the Swap function
continues to work, toggling between the most recently selected low-
resolution input and the most recently selected high-resolution input.
Unlike when PIP mode is on, however, the input that is replaced in the
main window is not displayed in the PIP window.
Picture Controls Buttons
PICTURE CONTROLS
CENTER
SIZE
CONT/
BRT
COL/
TNT
Figure 12.
Picture Controls Buttons
e
Picture Controls Buttons — The Picture Controls buttons provide a shortcut to select
individual or groups of image adjustments that are adjusted using the , , , and
buttons (g) (see “
” on page 36). These adjustments are also
available via the menu system.
Center control button — The Center button selects and deselects the display centering
adjustment. The adjustment range depends on the output resolution selected.
Size control button — The Size button selects and deselects the display size
adjustment. The adjustment range depends on the output resolution selected.
Contrast/Brightness control button — The Brightness/Contrast button selects and
deselects the display brightness and contrast adjustments. The adjustment range for
both brightness and contrast is from 0 to 128.
Color/Tint control button — The Color/Tint button selects and deselects the display
color and tint adjustments. The color adjustment range is from 0 to 128. The tint
adjustment range is from 0 to 128.
NOTE: The Color/Tint control affects only interlaced component video, S-video
inputs, and composite video inputs.
IN1508 • Operation
13