Extron Electronics IN1508 User Guide - Manual (Page 21)

l Menu buttons — The Menu buttons function identically to the front panel Menu
buttons (see “ Menu Control Buttons ” and f, g , and h , starting on page 14).
Menu button — The Menu button enters the main menu system and backs out of
the currently active submenu or selection (see “
Main Menu System ” on page 24 and
“ Picture Adjustments ” on page 34 for details).
, , , and buttons — The , , , and buttons navigate the main and picture
control menu systems (see “Main Menu System” and “Picture Adjustments” for details).
NOTE: When the connected output device is not displaying a menu or other
switcher-generated message, pressing the Menu control , , , or button
pops up an output volume status indicator bar on the output device. Use the
Menu control or button to decrease the output volume. Use the Menu
control and button to increase the volume.
Enter button — The Enter button:
• Activates a highlighted submenu or function in the IN1508 main menu system.
• Exits a slider-type status indicator bar control.
• Saves a changed value in a selection box control.
See “ Main Menu System ” on page 24 for details.
m Picture control buttons — The picture control buttons are a short cut to selecting
individual or groups of image status indicator bar displays that can be adjusted using the
, , , and buttons (l).
NOTES: • Size, Centering, Contrast/Brightness, and Color/Tint are also available
from the front panel (see “ Picture Controls Buttons ” and e on
page 13).
• Sharp and Phase are not available from the front panel picture control
buttons and are front-panel accessible only by navigating through the
main menu system.
Size button — The Size button selects and deselects the display size adjustment status
indicator bars. The adjustment range depends on the output resolution selected.
Center button — The Center button selects and deselects the display centering
adjustment status indicator bars. The adjustment range depends on the output
resolution selected.
Contrast/Brightness button — The Contrast/Brightness button selects and deselects
the display brightness and contrast adjustment status indicator bars. The adjustment
range for both brightness and contrast is from 0 to 128.
IN1508 • Operation 16