Extron Electronics IN1508 User Guide - Manual (Page 35)

Audio submenu
Figure 23 shows an overview of the Audio submenu, its available selections, and their
available settings. Use the front panel or IR remote control and buttons to highlight the
desired selection and press the Enter button.
Menu
Menu
Menu
Menu
Timeout
Enter
Menu
No
menu
display
0 dB
Timeout
Timeout
Timeout Enter
Press Enter to
select a change.
Menu
(-65 dB to +9 dB)
Menu
Menu
Off
On
AUDIO
Input Gain/Atten Input Gain/Atten
Enter
Menu
100
(0 to 100)
Menu
Enter Output Volume Output Volume
Audio Delay Audio Delay
PICTURE
INPUT
OUTPUT
ADVANCED
Menu Menu
Timeout
Timeout
Timeout
Timeout
Timeout
Figure 23. Audio Submenu Flowchart
Output Volume status indicator bar
The Output Volume status indicator bar shows and allows you to adjust the audio output
level (attenuation). Use the front panel or IR remote control and buttons to increase or
decrease the volume through a range of 0 to 100. The default setting is 100, that is, no
attenuation (full volume).
Input Gain/Attenuation status indicator bar
The Input Gain/Attenuation status indicator bar shows and allows you to adjust the audio
level (gain or attenuation) for the selected input. Use the front panel or IR remote control
and buttons to increase or decrease the level frequencies through a range of –65 dB to
+9 dB. The default setting is 0 dB, no gain or attenuation.
Audio Delay selection box
The Audio Delay selection box provides the ability to turn audio delay on and off. Audio
delay compensates for the latency period that is inherent in deinterlacing NTSC, PAL, and
SECAM video by delaying the audio output to match the video output. Use the front panel
or IR remote control and buttons to select On or Off and then press the Enter button.
The default is On.
IN1508 • Operation 30