Tint status indicator bar, Sharpness status indicator bar, Output submenu – Extron Electronics IN1508 User Guide User Manual
Page 32: Figure 22. output submenu flowchart
The Color status indicator bar shows, and allows you to adjust, the color setting for the
selected input. Color increases and decreases the color intensity of the picture. Use the front
panel or IR remote control and buttons to adjust the contrast through a range of 0 to
128. At the minimum setting, 128, the switcher removes most of the color. The default
setting is 64.
Tint status indicator bar
NOTE: The tint adjustment is available for S-video and composite video inputs only (
on page 17).
The tint status indicator bar shows, and allows you to adjust, the tint setting.
Tint is a relative measure of the amount of white in a given color and adjusts the color of
the picture toward red or green. Use the front panel or IR remote control and buttons to
adjust the tint control through a range of 0 to 128. Press the button to increase the green
(and decrease the red). Press the button to increase the red (and decrease the green). The
default setting is 64.
Sharpness status indicator bar
The Sharpness status indicator bar shows and allows you to adjust the sharpness setting.
Sharpness uses variable filtering to affect input picture detail and definition. Use the front
panel or IR remote control and buttons to increase or decrease the sharpness filtering
through a range of 0 to 128. The default setting is 64.
Output submenu
Figure 22 shows an overview of the Output submenu, its available selections, and their
available settings. Use the front panel or IR remote control and buttons to highlight the
desired selection and press the Enter button.
Timeout
Timeout
Timeout
Timeout
Timeout
Timeout
Timeout
No
menu
display
AUDIO
PICTURE
INPUT
OUTPUT
ADVANCED
Menu
Menu
Timeout
Timeout
Timeout
Timeout
Menu
Menu
Menu
Menu
Menu
Enter
Enter
Enter
Menu
Menu
Menu
Enter
Enter
Timeout
Timeout
1024 x 852
1024 x 1024
1366 x 768
1365 x 1024
800 x 600
640 x 480
1024 x 768
1280 x 1024
720 x 480
720 x 576
1600 x 1200
1400 x 1050
1280 x 720
1920 x 1080
1920 x 1080
SVGA
VGA
XGA
1280 x 768
SXGA
480p
576p
UXGA
720p
1080i
1080p
1440 x 900
1680 x 1050
1280 x 800
852 x 480
25 Hz
50 Hz
60 Hz
59.94 Hz
75 Hz
Sync H– / V+
Sync H– / V–
Sync H+ / V+
Sync H+ / V–
Resolution
Resolution
Refresh Rate
Refresh Rate
Sync Polarity
Sync Polarity
Signal Type
Signal Type
Menu
Menu
Menu
Menu
Press
Enter
to
select a change.
Press
Enter
to
select a change.
Press
Enter
to
select a change.
Press
Enter
to
select a change.
RGBHV
RGsB
Y,B-Y,R-Y
RGBS
Figure 22.
Output Submenu Flowchart
IN1508 • Operation
27