Extron Electronics IN1408 User Manual

Page 16

Advertising
background image

14

© 2002 - INLINE, Inc.

IN1408 Operation Manual - V1.4 3/21/02 12:32 PM

The following video adjustment parameters can be controlled via the on-screen menu system which
can be accessed using the front panel buttons or the optional CTL120 IR remote control. See page 41
for information on using the CTL120 IR remote.

Á

Note:

Video adjustments do not affect inputs configured for RGB passive.



Brightness Setting:
Adjusts the input signal brightness.

Range: 0 to 255

Factory Default Setting: 128

Operation: Press

½ button to increase the brightness.

Press

¼ button to decrease the brightness.



Contrast:
Adjusts the difference between the input signal’s brightest and darkest settings. At the
minimum setting the entire picture is displayed at about the same brightness (very grayish). At the
maximum setting there is a great difference between the darkest and lightest parts of the screen.

Range: 0 to 255

Factory Default Setting: 128

Operation: Press

½ button to increase the contrast.

Press

¼ button to decrease the contrast.


Color Saturation: Adjusts the color saturation of the picture over a wide range. Setting this control
to 0 will remove most of the color. This control is only available for composite and S-Video signals.

Range: 0 to 255

Factory Default Setting: 128

Operation: Press

½ button to increase the color.

Press

¼ button to decrease the color.

RGB Gain: Changes the input signal gain (contrast) for each individual color. This control is only
available for component video, RGBHV, RGBS and RGsB signal formats.
Red, green and blue
controls are available.

Range: 0 to 255

Factory Default Setting: 128

Operation: Press

½ button to increase the Red, Green or Blue Gain.

Press

¼ button to decrease the Red, Green or Blue Gain.


Hue (NTSC Signals Only):
Adjusts the picture’s color towards red or green. This control is only
available for composite and S-Video signals.

Range: 0 to 255

Factory Default Setting: 128

Operation: Press

½ button to increase the green.

Press

¼ button to increase the red.







Advertising