Extron Electronics IN1408 - Manual (Page 42)

40
© 2002 - INLINE, Inc. IN1408 Operation Manual - V1.4 3/21/02 12:32 PM
COMMAND DESCRIPTION
ST? return scan type (add above
numbers)
SV+ increase vertical size
SV- decrease vertical size
SV@ set vertical size to
normal**(100)
SVxxx
set vertical position to
absolute value (
♦
-
100)
SV? Return vertical size
SYNC0 set output sync format to
RGBHV- -**
SYNC1 set output sync format to
RGBHV+ +
SYNC2 set output sync format to
RGBS (no serrations)
SYNC3 set output sync format to
RGBS with serrations
SYNC4 set output sync format to
RGsB
SYNC5 set output sync format to
RGsB w/Serr
SYNC? Return output sync format
TP+ increase total pixels
TP- decrease total pixels
TP@ set total pixels to normal**
♦
TPxxx set total pixels to absolute
value
♦
TP? return total pixels
TRE+ increase treble
TRE- decrease treble
TRE@ set treble to normal**(005)
TRExxx set treble to absolute value
(000-010)
TRE? return treble
UP front panel up button
VOL+ increase volume
VOL- decrease volume
VOL@ set volume to normal**(020)
VOLxxx set volume to absolute value
(000-030)
VOL? return volume
* This Command List is preliminary. All
commands listed in this manual are functional,
however, INLINE reserves the right to modify,
remove and /or add commands on future product
revisions. The commands are not case sensitive.
** Default values when factory reset is
performed .
♦
Normal and available values depend on the
current input or output mode .