Extron Electronics IN1408 - Manual (Page 25)

23
IN1408 Operation Manual - V1.4 3/21/02 12:32 PM © 2002 - INLINE, Inc.
ADVANCED MENU
To access the advanced menu via the front panel control buttons, press MENU, press the
¿ or ¾
button (if necessary) to reach the advanced menu, then press ENTER. Use the
¾ and ¿ buttons
and the ENTER key to select the setting you wish to adjust. Once you’ve optimized the setting,
press ENTER to save.
Executive Mode: This is a restricted operation mode that permits adjustments of common
controls but removes all menu items for advanced controls. Executive Mode is ideal for rental
applications, home theater installations and any other application where a non-technical users can
select inputs, adjust volume, and make video image quality adjustments, while advanced settings
like output resolution / refresh rate, RS-232 communication settings and other advanced
adjustments are disabled. When Executive Mode is enabled, all advanced function menu items
will now be missing from the on-screen and LCD menus, however, these functions are still
available through RS-232 serial commands.
To Enable or Disable Executive mode, use the menu item found under the advanced menu.
As shown in the menu tree on page 12, when Executive Mode is enabled only the items shown in
bold will be available.
On-Screen Menu: This menu item allows you to enable or disable the on-screen menus. It does
not affect the LCD status display, which is always functional.
Input Labels: Each input can display a label on the screen to indicate the name of the current
input. The factory default input labels read "Input x", with x being the number of the current
input. The IN1408 can also be programmed with custom input labels such as "VCR" , "Camera
5", or "DVD #2" or any other desired text to correspond with the name of the actual source
connected to each input. Use the input Select from the following label options:
•
On: The labels remain on-screen and change each time a new input is selected.
•
Off: The labels remain off and are not displayed.
•
Momentary: The label is displayed for 3 seconds anytime a new input is selected.
•
Reset: This resets the label to the factory default of “Input #.” This is beneficial if
the label was changed via user memory, or to reset the label if RS-232 control is no
longer available.
Á
Note: The input label text is user definable via RS-232 commands. Refer to RS-232
Control Section on page 36 for more information.
Factory Reset: Returns all video, audio, input, output and RS-232 settings for all inputs to
factory default.