Extron Electronics MGP 462xi Series - Manual (Page 100)

HTML Configuration and Control, cont’d
MGP Series • HTML Configuration and Control 5-4
PRELIMINAR
Y
Using the Configuration Pages
There are six Configuration pages, which only administrators can access. When
you click the Configuration tab, these pages are listed in the sidebar menu at the left
of the screen. The following sections describe the changes you can make from these
pages.
System Settings page
On the System Settings page (shown below), you can set date and time parameters,
and change the IP information for the MGP.
System Settings page
To change your system settings,
1
. On the Configuration tab, select System Settings from the sidebar menu at the
left edge of the screen.
2 . Select or enter the new information in the desired field(s) in either the IP
Settings or the Date/Time Settings section.
3 . When you have made all the desired inputs in one section, click the Submit
button at the bottom of the section. The new settings appear in the fields.
4 . Follow steps 2 and 3 to make changes in the other section, if needed.