Extron Electronics MGP 462xi Series - Manual (Page 74)

SIS
™ Pr
ogramming and Contr
ol, cont’d
MGP Series • Softwar
e Configuration and Contr
ol
4-22
PRELIMINARY
Command/response table for SIS commands (continued)
Command
ASCII (Telnet)
(host to processor)
Response
(processor to host)
Additional description
Special functions
Output polarity 1 * X\ # Pol X\ ] Set output polarity. For X\ :
0 = H-/V- (default)
1 = H-/V+
2 = H+/V-
3 = H+/V+
Example: 1 * 2 # Pol 2 ] H+/V– sync polarity
View output polarity 1 # X\ ] View the current output polarity setting.
Output sync format 2 * X\ # Syn X\ ] Set the output sync format. For X\ :
1 = RGBHV
2 = RGBS
3 = RGsB
4 = YUV bi-level
5 = YUV tri-level
View output sync format 2 # X\ ] View the current output sync format setting.
Blue mode 3 * X% # Blu X% ] Turn blue mode on and off. For X% :
1 = blue mode on; 0 = blue mode off.
View blue mode status 3 # X% ] View the current blue mode status.
Text position 6 * X50@ * X50% # X50@ Tlc X50% ] Change the location of the text label to X50% in
window X50@ .
X50@ = 0 through 4; 0 = all windows.
For X50% :
0 = None 4 = Top left
1 = Bottom left 5 = Top center
2 = Bottom center 6 = Top right
3 = Bottom right
View text position 6 * X50@ # X50% ] View the text label position in window X50@ .
Text size 10 * X\ # Tsz X\ ] Set the size of the label text. For X\ :
1 = Small
2 = Medium
3 = Large
View text size 10 # X\ ] View the current size of the label text.