Extron Electronics MGP 462xi Series - Manual (Page 67)

4-15
MGP Series • Softwar
e Configuration and Contr
ol
PRELIMINARY
Command/response table for SIS commands (continued)
Command
ASCII (Telnet)
(host to processor)
Response
(processor to host)
Additional description
Vertical size (image)
Specific value 2 * X50@ * X52# ; X50@ Ivs X52# ] Set the height of the image in window X50@ to
X52# .
X50@ = 0 through 4; 0 = all windows.
For X52# :
Minimum = 1/16 the size of the active input area.
Maximum = double the active output area for 200%
zoom.
Increase vertical size of image 2 * X50@ + ; X50@ Ivs X52# ] Increase the height of the image in window X50@ .
Decrease vertical size of image 2 * X50@ – ; X50@ Ivs X52# ] Decrease the height of the image in window X50@ .
View vertical size of image 2 * X50@ ; X52# ] View the height of the image in window X50@ .
Picture control copy
Copy picture controls 21 * X50@ # Pcc X50) ] Copy the picture controls for currently displayed
input
X50) to window X50@ .
X50) = 1 through 19.
Window size and position
Set window size and position E X50@ , X52! * X52! * X52@ * X52@ X Y }
Wxy X50@ , X52! * X52! * X52@ * X52@ ]
Set the position and size of window X50@ to X52!
and X52@ , respectively.
For X52! :
0 = 2048; limits are ± the output resolution.
For
X52@ :
Minimum = 1/16 the size of the active output area.
Maximum = size of the active output area..
N The variables must be entered in the following order: Horizontal position, vertical position, horizontal size, vertical size.
View size and position E X50@ X Y } X50@ , X52! * X52! * X52@ * X52@ ]
View the position and size of window X50@ .