Preliminar y, Installation, cont’d – Extron Electronics MGP 462xi Series User Manual

Page 22

Advertising
background image

Installation, cont’d

MGP Series • Installation

2-8

PRELIMINAR

Y

f

Reset LED

This LED, located to the upper-right of the reset button, blinks a

varying number of times to indicate which reset mode has been entered. See

Resetting

” in chapter 3, “Operation”, for details.

g

BNC output connectors Plug an output device into these five BNC

connectors, as shown below.

R

/R-Y

G

/Y

B

/B-Y

H

/HV

V

RGBHV

R

/R-Y

G

/Y

B

/B-Y

H

/HV

V

RGBS

R

/R-Y

G

/Y

B

/B-Y

H

/HV

V

RGsB

R

/R-Y

G

/Y

B

/B-Y

H

/HV

V

HD YUV Component Video

Connecting to output BNC connectors

h

DVI output — Plug a DVI output device into this DVI-I connector.

N

Analog RGB is not available on this DVI connector.

N

When two output devices are attached (one to each

output connector), they both display the same image.

i

DVI background input — Connect a DVI input source to this DVI-I connector

in order to display the DVI video source live as a

background on your output screen. The four MGP

windows are displayed in front of this DVI image.

When a DVI background is used, the MGP output is

locked to the input rate of the DVI background. This input is not scaled.

N

This input connector can be used only to receive the background image. The

input is not scaled or processed. To process DVI input signals, use an MGP DI

or HD-SDI model.

j

DVI inputs — Connect up to four (MGP 464/462xi DI) or two

(MGP 464/462xi HD-SDI) DVI input sources to these

DVI input connectors, as an alternative to using the

fully-configurable BNC input connectors (

a

). These

inputs are available only on the MGP DI and HD-SDI

models, which have the DVI card installed.

N

Analog is not available on these DVI-I connectors.

k

HD-SDI inputs (MGP 464/462xi HD-SDI models only) — Connect one or

two HD-SDI inputs to these HD-SDI input connectors.

N

Standard definition SDI is not supported on these

HD-SDI inputs.

l

AC power connector — Connect the included power cord from this male IEC

connector to a 100–250 VAC, 50-60 Hz power source.

DVI-D OUTPUT

INPUT 1-DVI-D

INPUT 1-HD-SDI

DVI BACKGROUND

Advertising
This manual is related to the following products: