Extron Electronics MGP 462xi Series - Manual (Page 71)

4-19
MGP Series • Softwar
e Configuration and Contr
ol
PRELIMINARY
Command/response table for SIS commands (continued)
Command
ASCII (Telnet)
(host to processor)
Response
(processor to host)
Additional description
Active lines
Specific value 13 * X50) * X51& # Aln X50) * X51& ] Set the active lines value for the input X50) to X51& .
X50) = 1 through 19.
X51& = Auto-sensed value ± 512 lines or pixels.
Increment active lines value 13 * X50) + # Aln X50) * X51& ] Select the next higher active lines value.
Decrement active lines value 13 * X50) – # Aln X50) * X51& ] Select the next lower active lines value.
View active lines setting 13 * X50) # X51& ] View the current active lines setting for input X50) .
Output scaler resolution and rate
Set output resolution and scan rate X50* * X51% = Rte X50* * X51% ] Select a scaler output resolution and scan rate.
X50* = scaler resolution. For X50* :
1 = 640x480 14 = 1600x1200
2 = 800x600 15 = 480p
3 = 852x480 16 = 576p
4 = 1024x768 17 = 720p
5 = 1024x852 18 = 1080i
6 = 1024x1024 19 = 1080p
7 = 1280x768 20 = DVI background input resol
8 = 1280x1024 21 = 1280x800
9 = 1360x765 22 = 1360x768
10 = 1365x768 23 = 1440x900
11 = 1366x768 24 = 1680x1050
12 = 1365x1024 25 = 1080p Sharp
13 = 1400x1050 26 = 1920x1200
X51% = scaler refresh rate. For X51% :
1 = 50 Hz 6 = 120 Hz
2 = 60 Hz 7 = DVI background input refresh rate
3 = 72 Hz 8 = 24 Hz
4 = 96 Hz 9 = 59.94 Hz
5 = 100 Hz
View output rate settings = X50* * X51% ] View the current output's resolution X50* and
refresh rate X51% settings.
View output rate details 0 = width * height * refresh rate ] View the current output's resolution and refresh
rate in actual numbers.
N The output rate detail command can display the actual resolution of the output when the MGP is configured to use the DVI background rate.
Example 0 = 1024*0768*060 The output resolution is 1024x768; the rate is 60 Hz.