Video and audio data, Switched network configuration, example 1, Example 1 – Extron Electronics VN-Matrix 300 User Guide User Manual

Page 27

Advertising
background image

VN-Matrix 300 • Installation and Basic Setup Procedures

21

Video and Audio Data

Video and audio data may be transported over either of the NICs on the VN-Matrix 300 unit
and are independent of the system control data.

NOTE: The browser is accessible via either network port on the unit that is configured

as the controller.

Switched Network Configuration, Example 1

NOTES: In this example, two VN-Matrix 300 units are configured to work across a

switched network.

•

Unit 1 is configured as the controller, on IP address 172.28.0.1.

This unit serves the management interface (GUI).

•

The browser (control) PC may be connected to either NIC.

System control data is always sent over the 172.28.x.x network

•

Image data is configured to run over NIC 1 (the RJ45 connector).

This is defined in the management interface, described later.

NIC2:192.168.0.1

NIC1:172.28.0.1

NIC2:192.168.0.2

NIC1:172.28.0.2

Switch

Local NMS server

172.28.0.3

Browser

172.28.0.4

Unit 1

Unit 2

Controller

Browser (NIC2)

192.168.0.3

Switch

Browser address

192.168.0.1

Browser address

172.28.0.1

Unit 1

Network Port 1 (RJ45)

Network Port 2 (SFP)

0

Speed/Duplex:auto_10_100_1000

10

Speed/Duplex:Fiber_fixed_1000

1

Boot method: static [dhcp]

11

Boot method: static [dhcp]

2

Address: 172.28.0.1

12

Address: 192.168.0.1

3

Netmask: 255.255.0.0

13

Netmask: 255.255.255.0

4

Gateway:

14

Gateway:

5

Broadcast:

15

Broadcast:

6

Mtu: 1500

16

Mtu: 1500

7

Controller ip: 172.28.0.1

8

Controller port: 5432

18

Webserver port: 80

9

Exit

Advertising