Device summary (a), Licensed features (b), Device summary licensed features – Extron Electronics VN-Matrix 300 User Guide User Manual
Page 35: Device page, Device summary, Licensed features
VN-Matrix 300 • System Configuration
29
Device Page
Select a device from the device list:
z
Double click the mouse pointer on any of the entries for a device in the list (see
figure
The
Device
page of the chosen unit will be displayed. The example below shows the
Device
page for an encoder.
Figure 16.
Device Page is Divided into Four Information Areas
Device Summary (
a
)
z
Device Name — The name of the device may be changed to a User specific value. This
is the name of the device itself.
z
Serial Number of the unit — For information only, required when upgrading the licence
on a device.
z
IP address: port — This field shows two pieces of information:
z
The IP address of the Media 1 ETHERNET interface.
z
The port number that has been configured for send and receive of UDP control
information.
z
By default these are 9001 (send), 5432 (receive).
z
Link Status — The condition of the ETHERNET network link to the controller.
Licensed Features (
b
)
z
This field provides a description of features that are enabled on the device.
z
The licence management button provides access the
License
page where additional
features may be enabled.