Network port 2: sfp – Extron Electronics VN-Matrix 300 User Guide User Manual
Page 75
VN-Matrix 300 • Technical Data
69
Network Port 2: SFP
Function:
Port 2 is used for network connectivity and supports
10/100/1000BASE-LX (Gigabit Ethernet) optical and
10/100/1000BASE-TX (Gigabit Ethernet) copper
connections.
Connector type:
SFP (mini-GBIC) GIGABIT slot for copper or Optical SFP
compatible transceivers.
Optical SFP compatible
transceivers:
Dell / Finisar FTLF8519P2BNL Transceiver module
Optical wavelength:
850nm
Recommended cable:
Ethernet 1000base-SX
Maximum transfer
distance:
550meters
Compliant Standard:
IEEE802.3
Ethernet (MAC) address:
Each address is unique and in the format 0:E0:AA:10:
xx
:
yy
where:
yy
is in the range 00 – FF
xx
is in the range 00 – FF
For example: Port II: 00:E0:AA:10:10:18
IP address:
Factory-set default is:
Port II: 192.168.1.12
User-definable via the serial interface.