Extron Electronics VN-QUANTUM User Guide - Manual (Page 20)

Section 1: Installation & Setup VN-QUANTUM User Guide
Page 20 I455GB issue 8
Mains Power Cord
The VN-QUANTUM Processor is equipped with an IEC320 C14 3-pin (male) type mains connector
which requires a power cord fitted with an IEC320 C13 (female) connector.
Two power cords are supplied with the VN-QUANTUM Processor, each having a different termination;
you must use the lead appropriate for the country of installation:
In... Use the... Re-order Code
USA and Canada cord fitted with the 3-pin
American-style ‘Edison’ plug. CA4292
UK, Europe and all
other countries unterminated cord and fit a
suitable plug as described on
page 21. CA429
WARNING: Do not allow anything to rest on the mains power cord.