Extron Electronics VN-QUANTUM User Guide - Manual (Page 3)

VN-QUANTUM User Guide Contents
I455GB issue 8 Page 3
IMPORTANT SAFETY MARKINGS
The following symbols are used on the throughout this User Guide to advise you of important
instructions:
This symbol warns the presence of a voltage of sufficient magnitude to cause a
severe or fatal electric shock. Follow the appropriate instructions carefully to
avoid the risk of injury.
This symbol indicates an important instruction for the correct and safe installation,
operation or maintenance of your VN-QUANTUM PROCESSOR system. Failure to
comply with such instructions may result in injury to personnel or damage to the VN-
QUANTUM PROCESSOR hardware.
This product conforms with the protection requirements of the EC Directive
89/336/EEC (relating to Electromagnetic Compatibility) and EC Directive 73/23/EEC
(relating to Low Voltage) by application of the following standards:
EN 55103-1:1996; EN 55103-2:1996; EN60950:2000
Provided that:
• The product is used in accordance with the manufacturer’s instructions.
• The product is not connected to any peripheral equipment that is not CE marked.
This product has been tested by Underwriters Laboratories Inc.
®
(file no. E163058)
and found to be fully compliant with the following safety standards:
UL 60950-1:2003
Information Technology Equipment Safety - Part 1: General Requirements
CSA C22.2 No. 60950-1-03
Information Technology Equipment Safety - Part 1: General Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.