Extron Electronics VN-QUANTUM User Guide - Manual (Page 79)

VN-QUANTUM User Guide Section 3: Functional Overview
I455GB issue 8 Page 79
Remote Control
of VN-COMMANDER
VN-COMMANDER can be remotely controlled using RS-232 serial strings. These allow full control of
scene selection as well as window size, positioning and contents. Control strings may be generated
by various means.
In addition, VN-COMMANDER can be controlled by an automation client. This allows customized user
interfaces to be created for specific applications. For further details on using automation, please
contact Electrosonic.
of External Devices
VN-COMMANDER provides the ability to control external devices via RS-232 or Ethernet. Control
commands can be included with each scene such that the commands are automatically transmitted
when the scene is recalled.
Using suitable interfaces these commands can be used to control external source devices (e.g.
DVD/VHS players or source switchers) or environmental control subsystems (e.g. lighting, blinds, etc.)