Extron Electronics VN-QUANTUM User Guide - Manual (Page 47)

VN-QUANTUM User Guide Section 2: Hardware Overview
I455GB issue 8 Page 47
Rear Panel Features
Mains Inlet Connector & Latch
Mains connection to the unit is via this standard IEC 3-pin connector. A latch is provided which hooks
over the mains plug to prevent it from becoming accidentally loosened or disconnected.
Network Ports
Two separate Gigabit Ethernet (1000Base-T) ports (labeled MEDIA I and MEDIA II) provided for
connection to external local area or wide area networks (LAN or WAN). VN-QUANTUM accesses VN-
GLIMPSE sources or network based content via these ports.
Control Port
A single Fast Ethernet (100Base-T) port (labeled CONTROL) for connection to an external control
computer, running VN-COMMANDER application software. VN-COMMANDER is used to control the
placement of sources on the target display.
ES3311-2 12-Channel Video Input Cards ES3310 2-Channel Output Cards
Mains Inlet Connector & Latch
PS/2 Ports
(Keyboard/Mouse)
Monitor Out
Network
Ports
Card Slot 1
Card Slot 15
USB Ports
Control Port
Card Slot 0