NXG Technology NX-RM610 - Manual (Page 15)

NX-RM610
13
Select
the Device
you want to
“Punch To“
Press the
Page button
to display
the other ten
Device
names
4 Press the device button for the device that doesn’t have volume
control commands yet (i. e., DVD). This is the device you are going
to PUNCH TO for the volume and mute commands.
Note: If you wish to PUNCH to the MAIN device, press the
POWER OFF button at this time.
5 The bottom of the display will then flash “PUNCH FROM”. Now you
select the device that has the volume commands you want (i. e., TV
for systems using the TV speakers, AUDIO for systems with
surround sound receivers). The bottom of the display will flash
“SAVED”.
6 Repeat steps 3-5 until all your devices operate the volume perfectly.
Press the MAIN button twice to return to normal operating mode and
test your Punch Through settings.
Note: The Punch Through feature is not limited to volume and
can also be applied to channel or other functions. If you find
yourself switching to a particular device frequently to use a group
of controls, consider using Punch Through for another group, as
listed here:
POWER - Power On and Power Off
MENU - Menu, Guide, Info, Exit and the four cursor buttons.
VOL - Volume Up, Volume Down and Mute
CH - Channel Up, Channel Down, Previous Channel, all of the numeric
PLAY- Play, Stop, Pause, Rewind and Fast Forward
NX-RM610_Remote_Manual 10/6/08 4:04 PM Page 15