NXG Technology NX-RM610 - Manual (Page 25)

EDIT
Button
PAGE
Button
23 Hiding and Adding Pages
Each of your NX-RM610 Devices contains up to four pages (if a
page has no IR data, it will be HIDDEN). However, you can HIDE
any page from the users view. A hidden page still appears in SETUP
modes, so can be used in macros. If you change your mind and
would like the user to see a hidden page, you can ADD them. You
can add or hide pages on devices, or on your favorite channel
pages using this simple process:
Note: Be sure to program your Macros before you hide pages
with a potential macro step in them. You can’t access hidden
pages during macro setup. However, after you finish Macro
setup, you can hide pages without affecting operation of your
macros.
1 Enter SETUP mode by pressing and holding both MAIN and ENT for
three seconds.
Note: You have 30 seconds for each step, otherwise the
NX-RM610 will time out automatically.
2 Press the EDIT button.
3 Press the PAGE button.
“PAGE” appears at the top of the screen.
NX-RM610
23
NX-RM610_Remote_Manual 10/6/08 4:05 PM Page 25