NXG Technology NX-RM610 - Manual (Page 9)

6 In this step you select which code table to use. Thus, you can pro-
gram a device named “TV” with codes from the CABLE code tables
and a device named “VIDEO” with codes from the TV code table.
If you don’t see the code table you need, press the PAGE buttons
to reveal the other page of code table categories, then select the
code table you want to use.
Note: Each name that appears in the display may include several
types of components. For example, the AUX category includes
many types of custom installation devices. See page 37 for a list
of component types each Code Table contains.
7 Point the NX-RM610 at the component, then enter the first three-
digit code number from your notes using the numbered buttons.
After you enter each three-digit number, look at the component to
see if it turned off.
Continue to enter code numbers until the component turns off.
For Example: I have a Sony TV. I found the code numbers 070,
139, 147, 126, 185, 194 and 085 under Sony in the TV TABLE.
Using the numbered buttons on the NX-RM610, I entered 070
and looked at the TV. It didn’t turnoff, so I entered 139, then 147
and so on, until I found the code that powered off the TV.
NX-RM610
7
Use the
number buttons
to enter
the
code
number
NX-RM610_Remote_Manual 10/6/08 4:04 PM Page 9