NXG Technology NX-RM610 - Manual (Page 31)

The NX-RM610 sends radio
signal to the NX-RF200
Base Station.
The RF Base Station converts radio
signals to standard infrared commands
and sends them out via a built-in front
blaster and/or the flashers to compo-
nents. The blaster is useful when a
number of components are in the
same cabinet shelf space.
Self-adhesive “flashers” (included with the
NX-RF200) affix to the front panels of your
components. The flashers relay infrared commands
to components out-of-sight of the front blaster. The
flashers plug into the rear flasher line output jacks.
Each flasher has a 10' cable to easily reach
components on nearby shelves.
NX-RM610
29
NX-RM610_Remote_Manual 10/6/08 4:05 PM Page 31