Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Operators Guide Rev. C - Manual (Page 55)

3 Page 3 - 20 Tank Sentinel Operator’s Guide
Sample Reports (C
ONTINUED
... )
Alarm Reports (Continued... )
All Active Alarms REPORT
Reports all active system, tank, sensor, and line alarms.
The date, time of the alarm, and the alarm name are
shown (typical). The most recent alarms are shown first.
TSP-HIS BriteSensor 8
(Channel # 8) is in alarm (Low Brine Level).
Printer is Out of Paper alarm.
Standard Sensor 7
(Channel # 7) is in alarm.
Tank 1 (high product level) alarm.
The following example report is a scheduled Active Alarm
report where no active alarms exist.
This report cannot be printed manually from the keypad if no
data exists. The message NO ACTIVE ALARMS EXIST is
displayed in this case (or CLEARED in the case of Cleared
Alarm Reports).
All Cleared Alarms REPORT
Not shown... reports only cleared system, tank, sensor,
and line alarms.