Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, 508 & 750) Installation - Manual (Page 67)

7 Page 7 - 24 TANK SENTINEL ® INSTALLATION GUIDE
Figure 7-12. Console Communications Interface & Cable Routing
1.) See Figure 7-1C for a Bottom View of the console connectors
2.) See Figure 7-11 about adding the optional internal Fax/Modem
3.) COMM PORT 2 is the recommended communications port for external
equipment
To: G-Site tower, or POS terminal, or to an external modem.
Or to an IBM-PC as an alternate method to connect to an INCON
communications software program (a NULL MODEM cable is
required in this last case).
Bottom of the Tank Sentinel console
COMM
PORT
1
DCE
The telephone cable
plugs into the RJ11 jack
at the bottom of the
console for the optional
internal Fax & Data Modem
or Data Only Modem.
INCON recommends using
a separate telephone
line, which is not shared
with other devices.
A TS-MLS Multi-Line Switch
is available if a phone line
must be shared.
RJ
11
COMM
PORT
2
DTE
To IBM-PC
for local
INCON
communications
software
program
interface.