Alpha Technologies CE-G Series - Manual (Page 41)

4. Operation
4-16
031-093-C0-001 © 3/99
End of conversion Procedure
1. Securely fasten all hoses.
2. Open previously-filled gas bottles.
3. Perform leak check with approved leak-detection solution
7.1 Converting Collocated CEG Enclosure For Remote Application
3. Install the gas hoses to the brass fitting located on the inside of remote
gas utility box. (see picture)
4. Hook up interconnecting gas pipe to the remote utility gas box pipe
fixture.
Figure 4.24,Hose connection