Alpha Technologies PWE-SG Series - Manual (Page 19)

19 033-090-C0-001, Rev. A
Close the battery tray, keeping the wires clear. To install a tamper switch, see Section 2.8 for
instructions.
2.0 Installation, continued
2.5 Connecting to the Legacy (Upper) Enclosure
Replace the battery you removed in Section 2.4, Step 2. Referring to Fig. 2-13, hook up the
battery strings.
Fig. 2-13, Legacy Enclosure Battery Wiring
Using the battery
cables from the
conduit, hook up
the battery string.
The cables will be
co-terminated.