Alpha Technologies PWE-SG Series - Manual (Page 8)

033-090-C0-001, Rev.A 8
1.0 Introduction
The PWE-SG is a stand-alone pole mount battery enclosure that supports several battery
configurations and increases the capacity of your existing enclosure systems.
The PWE-SG is a flexible and complementary addition to your legacy enclosure and comes with a full
range of options, including a battery drawer, battery heater mat, and a tamper switch.
1.1 PWE-SG Enclosure Description
The enclosure specifications vary depending on the battery configurations used in the PWE-
SG. See Table 1-2.
16 1/4"
30 3/4" 17"
30 1/4"
Fig. 1-1, PWE-SG Dimensions