American Expedition Vehicles JK HEMI Builder Kit - Installation Guide for 12+ JK Wrangler User Manual
Page 14
Advertising
12
15. Cut and install the heater core hoses, re-using the factory hose clamps. 5.7L engines will re-use the
original 3.6L heater core hoses, 6.4L engines use 3.8L heater core hoses listed on the bill of materi-
als (fig 19).
6.4 L
5.7 L
Cut and save lighter portion
Figure 19
16. Cut, prep, paint, and install transmission dip stick bracket (fig 20).
Figure 20: Cut and save lighter portion
Advertising