Back to chassis – American Expedition Vehicles JK HEMI Builder Kit - Installation Guide for 12+ JK Wrangler User Manual
Page 19
Advertising
17
Figure 23
25. Modify brake booster as shown (fig 24) and install with fresh cut end to engine.
Figure 24: Remove highlighted portion
BACK TO CHASSIS
26. Install new power train into chassis.
27. Modify the power steering return line to accept the supplied gear to cooler return line (fig 25) and
then install on the steering gear (fig 26).
28. Install the supplied power steering pressure line (fig 26).
Figure 25: Modifying power steering return line
Advertising