American Expedition Vehicles JK HEMI Builder Kit - Installation Guide for 12+ JK Wrangler User Manual
Page 25
Advertising
23
9. Install the cooling module back into the body. Notice the positioning of steering cooler lines shown in
Figure 34..
Figure 34
10. Install the fan assembly onto the back of the radiator using the factory hardware.
11. Trim and install the upper radiator shroud. Also remove the factory decal on the upper shroud and
install the supplied AEV decal (fig 35).
Figure 35
12. Modify wiring at fire wall as shown (fig 36).
Figure 36
Advertising