American Expedition Vehicles JK HEMI Builder Kit - Installation Guide for 12+ JK Wrangler - Manual (Page 2)

ii
table of contents
1. Overview 1
2. Vehicle Disassembly 1
3. Chassis Preparation 6
4. New Engine Preparation and Assembly 8
5. Engine Bay Preparation 21
6. Body Re-Installation 25
7. New Engine Start Up Procedure 32
8. ProCal Programming 33
PLEASE NOTE THAT THIS KIT HAS NOT BEEN TESTED TO COMPLY WITH FMVSS STANDARDS
AND MUST NOT BE INSTALLED IN ANY NEW VEHICLE PRIOR TO DELIVERY TO THE END USER.
WHILE ALL CORRECT EMISSIONS EQUIPMENT IS DESIGNED TO BE INSTALLED WITH THIS
KIT, THIS KIT MAY STILL NOT BE LEGAL FOR ON-ROAD USE IN ALL STATES OR COUNTRIES
AND AS SUCH IS CURRENTLY INTENDED FOR OFF-ROAD USE ONLY. IT IS THE USERS
RESPONSIBILITY TO COMPLY WITH ALL REGULATIONS.
AEV DOES NOT RECOMMEND ANY MODIFICATIONS TO HEMI ENGINES OR TRANSMISSIONS.
TECH SUPPORT CAN NOT BE PROVIDED FOR ANY CONVERSIONS USING AFTERMARKET
PERFORMANCE PARTS INCLUDING BUT NOT LIMITED TO CAMSHAFTS, HEADS, EXHAUST
MANIFOLDS, AFTERMARKET EXHAUSTS, INTAKES, THROTTLE BODIES, PERFORMANCE
ECU CALIBRATIONS, STROKER KITS, SUPERCHARGERS, TURBOCHARGERS, SHIFT KITS
OR ANY OTHER NON PRODUCTION ITEM.
PLEASE READ BEFORE YOU START
TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND READING THESE INSTRUCTIONS
THOROUGHLY BEFORE BEGINNING ANY WORK. THESE INSTRUCTIONS ASSUME A CERTAIN
AMOUNT OF MECHANICAL ABILITY AND ARE NOT WRITTEN NOR INTENDED FOR SOMEONE NOT
FAMILIAR WITH AUTO REPAIR.
This product is covered under the AEV Parts Limited Warranty, a copy of which can be found at aev-conversions.com/warranty.