Atec Agilent-E5063A - Manual (Page 16)

16
General Information
Description General characteristics
System bandwidth
Range
10, 15, 20, 30, 40, 50, 70, 100, 150, 200, 300, 400, 500, 700, 1 kHz, 1.5 kHz, 2 kHz, 3 kHz, 4 kHz,
5 kHz, 7 kHz, 10 kHz, 15 kHz, 20 kHz, 30 kHz, 40 kHz, 50 kHz, 70 kHz, 100 kHz, 150 kHz,
200 kHz, 300 kHz
Front panel
Description Typical General characteristics
Test ports Type-N, female, 50 Ω (nominal)
Display
Type
Resolution
10.4 inch TFT color LCD with touch screen
XGA (1024 x 768)
1
USB host port Universal serial bus jack, type A
coniguration, female; provides connection to
mouse, keyboard, printer, ECal module, USB
coaxial switch, or USB/GPIB interface
1. Valid pixels are 99.99 % and more. Below 0.01 % (approx. 30 points) of fixed points of black, blue, green or red are not regarded as failure.
Rear panel
Description Typical General characteristics
External trigger input connector
Type
Input level
Pulse width
Polarity
BNC, female
Low threshold voltage: 0.5 V
High threshold voltage: 2.1 V
Input level range: 0 to + 5 V
≥ 2 μsec
Positive or negative
External trigger output connector
Type
Maximum output current
Output level
Pulse width
Polarity
BNC, female
50 mA
Low level voltage: 0 V
High level voltage: 5 V
1 μsec to 1 sec (adjustable)
Positive or negative
External reference signal input connector
Type
Input frequency
Input level
10 MHz ± 10 ppm
0 dBm to ± 3 dB
BNC, female
Internal reference signal output connector
Type
Output frequency
Signal type
Output level
Output impedance
10 MHz ± 7 ppm
Sinewave
0 dBm ± 3 dB into 50 Ω
BNC, female
50 Ω